Disc Finishing

BV Products has designed and built our own range of high energy disc machines for some 35 years at its Melbourne plant but we also have a number of strategic alliances with several of the world’s major manufacturers of surface finishing equipment from Europe, Asia and the US and subsequently we can offer a huge variety of equipment of varying specifications and cost. All of this equipment is of course fully supported by us.

DF Series Machines

This style of mass-finishing machine has a round chamber with a rotating disc in the bottom. The disc rotates and forces the mass out and up against the stationary chamber wall, where it begins to slow down. The mass slows further as it reaches the top of the load, just before it descends back down the middle toward the spinning disc, where the cycle is repeated.

View brochure


1.Compact design suitable for both wet and dry processing
2.Working barrel is lined inside with hot poured high wear-resistant polyurethane for protracting working life.
3.Tough bearing with high wear-resistant ceramic/tungsten alloy ring
4.Distinctive gap adjusting system
5.Variable frequency inverter Speed control for more option processing. Rotary in both clockwise and anti-clockwise.
6.Timer for repeatable precision processing.

The constantly varying speeds of media and parts generate excellent surface finishes in cycles that vary in duration between the vibratory machines and the centrifugal barrel. It is also possible to use disc machines for processing flat parts that will stick together in conventional vibratory machines.

Technical Specifications

ModelCapacity (L)Motor (kw)Speed (rpm)Size (mm)Weight (kg)
DF38 382.2040900x820x220

Benchmark Example

Centrifugal Disc Finishing Machines are specially suitable for removal of strong burrs, intensive radiusing of small and mid-size parts as well as gently smoothing and high gloss polishing.


Send us an email with a
description of your application
and finishing requirements

Free Sample Trials

Send some sample pieces
for our free sample trials


We’ll send back a
recommendation of surface
finishing equipment and


If the results are right,
we’ll supply a finishing system along
with a step by step instruction manual
and a fully documented process report sheet